Road Trip Shoulder Bag sewing pattern
This is the Road Trip Shoulder Bag pdf sewing pattern from the designer Susie D Designs.
The designer says her sturdy shoulder bag has a stylish finish of coordinated piping around the flap closure and centre panels. The flap is secured with a riveted press-snap. There are two useful interior slip-in pockets and a long shoulder strap, enabling the bag to be worn cross-body.
Make it for yourself, family, friends or sell your finished items!
Skill level:
The designer rates her Road Trip Shoulder Bag as suitable for the intermediate sewer.
Sizing info:
When you make one of your own Road Trip Shoulder Bags it will measure approximately 28 cm (11”) by 29 cm (11 ⅜”) by 6 cm (2 ⅜”).
What’s needed to make a Road Trip Shoulder Bag:-
- Yardage is based on 112 cm (44”) fabric width and 90 cm (35.5”) Vilene interfacing width. Note: if using 20” width interfacing, like Pellon, you’ll need double the amount stated, see below. (1) 60 cm (3/4 yard) fabric 1 – cotton print. (2) 25 cm (3/8 yard) fabric 2 – cotton print. (3) 30 cm (3/8 yard) fabric 3 – cotton print. (4) 25 cm (3/8 yard) fabric 4 – cotton print. (5) 30 cm (3/8 yard) lining fabric – cotton solid.
- 1 m (1 1/8 yard) medium-weight woven fusible interfacing – Vilene G700 (double this amount is required if using Pellon SF101, or any other 20″ width, so get 2 ¼ yards).
- 25 cm (3/8 yard) low-loft fusible fleece – Vilene H630 – (double this amount is required if using Pellon 987F, or any other 20″ width, so get 3/4 yard).
- 2 m (2.2 yards) of 40 mm (1.5”) wide, bias cut strips of fabric – (alternatively, buy pre-made bias binding – such as pre-folded 25 mm / 1″ binding which you can then open out, press then re-fold in half).
- 2 m (2.2 yards) of 3 mm (1/8”) piping cord.
- 2x 2.5 cm (1”) rectangular metal belt-rings.
- 15 mm (5/8”) riveted press snap and fixing tool.
- Sewing-machine zipper presser foot.
When you add this pdf pattern to your pattern collection, you’ll be able to download a full set of ready-to-print actual size templates / pattern pieces. Measurements are also given for all the straight cut pieces if you prefer not to use templates (metric and imperial).
If you would like to download the pdf pattern you can click on the blue button below.
